To connect a DVD player to a Comcast cable box, start by tuning both the cable box and the TV to channel 2, 3 or 4, then connect the cable box to the wall. Next, connect the audio and visual cables between the DVD player and the TV, then connect the cable box and TV with a coaxial cable. connecting dvd to tv with cable box
Before connect DVD player to your TV or HDTV, make sure to power off both devices. Hook up a DVD player with HDMI Step 1: Insert one end of the cable into the HDIM interface on the DVD player. The interface is usually titled HDMI or HDMI Out. connect dvd player to tv
In this video, I show you how to connect a DVD player to a TV. It is a simple process and you basically have to use a cord to connect the output ports of the dvd player cables to tv
You can’t hook a DVD to a cable box. It doesn’t have inputs. If the cable box is connected to the antenna jack on the TV and that’s the only connection … connect dvd player to tv with hdmi
Connect one end of the HDMI cable to the Receiver connector labeled HDMI, Output, Monitor or TV and the other end to any Input HDMI connector on the TV. how to connect dvd player to hdtv
Plug the first end of the cable into the HDMI socket on the DVD player. Look for the "HDMI" or "HDMI Out" label and fit the cable securely into the socket. This is the highest quality connection for audio and video and is typically found only on modern DVD players. 2 dvd cables to tv
How to connect a Blu-ray or DVD player Blu-ray players need to be connected with an HDMI cable to one of the HDMI inputs on your TV. Some DVD players connect the same way despite not displaying an HD signal. If the DVD player is older then it may not have an HDMI output and use Scart instead. how to connect dvd to samsung tv
Whichever cable you use, plug one end into the DVD player, and the other into the corresponding port in the TV. If you are using the composite cable, plug the other end of the cord into the terminals on the DVD player marked Line Out. Be sure to insert the plugs into the terminals with corresponding colors.
Connect one side of an HDMI cable to the back of the DVD player. The other side of the HDMI cable connect it to an available input on your TV. Turn on the DVD player, and using the TV’s remote, select the corresponding input. At this point, you should see the DVD Player logo on your TV screen.
Make sure your Xfinity TV and DVD or VCR player are both tuned to channel 2, 3, or 4 (depending on your converter). Connect the wires so the cable signal passes from the main …